Ihr Warenkorb ist leer.
Partner/Lieferanten
Kategorien Controllerboards ALLNET FriendlyARM NanoPi Neo Air, Linux SBC
ALLNET FriendlyARM NanoPi Neo Air, Linux SBC
Artikel-Nr.: 42-10-1001zurzeit nicht lieferbar
34,00 €
Preis inkl. MwSt., zzgl. Versandkosten
Mit dem NanoPi Neo Air steht Ihnen einer der kleinsten und preisgünstigsten Single Board Computer mit Linux-Kern zur Verfügung und das jetzt mit WiFi und Bluetooth:
GPIO Pin Spec
| Pin# | Name | Linux gpio | Pin# | Name | Linux gpio |
| 1 | SYS_3.3V | 2 | VDD_5V | ||
| 3 | I2C0_SDA | 4 | VDD_5V | ||
| 5 | I2C0_SCL | 6 | GND | ||
| 7 | GPIOG11 | 203 | 8 | UART1_TX/GPIOG6 | 198 |
| 9 | GND | 10 | UART1_RX/GPIOG7 | 199 | |
| 11 | UART2_TX/GPIOA0 | 0 | 12 | PWM1/GPIOA6 | 6 |
| 13 | UART2_RTS/GPIOA2 | 2 | 14 | GND | |
| 15 | UART2_CTS/GPIOA3 | 3 | 16 | UART1_RTS/GPIOG8 | 200 |
| 17 | SYS_3.3V | 18 | UART1_CTS/GPIOG9 | 201 | |
| 19 | SPI0_MOSI/GPIOC0 | 64 | 20 | GND | |
| 21 | SPI0_MISO/GPIOC1 | 65 | 22 | UART2_RX/GPIOA1 | 1 |
| 23 | SPI0_CLK/GPIOC2 | 93 | 24 | SPI0_CS/GPIOC3 | 67 |
USB/Audio/IR Pin Description
| NanoPi-NEO-AIR | NanoPi-NEO-AIR | ||||
| Pin# | Name | Description | Pin# | Name | Description |
| 1 | VDD_5V | 5V Power Out | 1 | VDD_5V | 5V Power Out |
| 2 | USB-DP1 | USB1 DP Signal | 2 | USB-DP1 | USB1 DP Signal |
| 3 | USB-DM1 | USB1 DM Signal | 3 | USB-DM1 | USB1 DM Signal |
| 4 | USB-DP2 | USB2 DP Signal | 4 | USB-DP2 | USB2 DP Signal |
| 5 | USB-DM2 | USB2 DM Signal | 5 | USB-DM2 | USB2 DM Signal |
| 6 | GPIOL11/IR-RX | GPIOL11 or IR Receive | 6 | GPIOL11/IR-RX | GPIOL11 or IR Receive |
| 7 | SPDIF-OUT/GPIOA17 | GPIOA17 or SPDIF-OUT | 7 | SPDIF-OUT/GPIOA17 | GPIOA17 or SPDIF-OUT |
| 8 | MICIN1P | Microphone Positive Input | 8 | PCM0_SYNC/I2S0_LRC | I2S/PCM Sample Rate Clock/Sync |
| 9 | MICIN1N | Microphone Negative Input | 9 | PCM0_CLK/I2S0_BCK | I2S/PCM Sample Rate Clock |
| 10 | LINEOUTR | LINE-OUT Right Channel Output | 10 | PCM0_DOUT/I2S0_SDOUT | I2S/PCM Serial Bata Output |
| 11 | LINEOUTL | LINE-OUT Left Channel Output | 11 | PCM0_DIN/I2S0_SDIN | I2S/PCM Serial Data Input |
| 12 | GND | 0V | 12 | GND | 0V |
Debug Port(UART0)
| Pin# | Name |
| 1 | GND |
| 2 | VDD_5V |
| 3 | UART_TXD0 |
| 4 | UART_RXD0 |
Note:
SYS_3.3V: 3.3V power output
VVDD_5V: 5V power input/output. When the external device’s power is greater than the MicroUSB's the external device is charging the board otherwise the board powers the external device. The input range is 4.7V ~ 5.6V
All pins are 3.3V, output current is 5mA
Interessante Links:
Copyright © Böcker Systemelektronik